Edge Trim for storeWALL Slatwall panels
The storeWALL Edge Trim products are the same for HeavyDuty and Standard Duty. However, not all styles of Edge Trim are available in all colors. You can run with scissors and mix different panel and trim colors to add some color and style to your installation. (The included pictures do not reflect all colors available in each Edge Trim style. Reference the individual product below to see current available colors for each.)
All Edge Trim is available in 4ft or 8ft lengths. 8ft lengths will always ship at no-charge when ordered with 8ft. storeWALL panels. 8ft Edge Trim orders shipping on their own, will incur at least a $150 shipping charge due the cost of shipping 8ft+ oversize items. One solution to significantly lower this cost is to allow the Trim pieces to be cut down to 94" which reduces shipping to $50 or under. If you're ordering Trim alone, please note on your order during checkout you would agree to length reduction.
Download this Edge Trim Installation Guide by selecting this highlighted area as it will help answer tons of questions for you on the Edge Trim itself, how to install it, ideas on where to install it with many of examples.
We have (6) styles of storeWALL Edge Trim.
- Flat Trim
- Narrow L Trim
- Wide L Trim
- Large L Trim
- J-Trim
- Division Trim
Flat Trim is used to create borders on the face of a panel, cover a vertical seam or use it to trim around door jambs, windows and outlets. as an accent trim.
Narrow Trim has near equal length edges (1/2 in. x 5/8 in.) and is used primarily around the panel edges and can also be used around door jambs, windows and outlets.
Wide Trim has one of it's edges a bit wider (1 in. x 5/8 in.) primarily used if you have a backer of some sort and your panel is not flush against the wall or the the walls your mounting to are not plumb. You can also use Wide Trim to trim the outside edge of a wall where a panel also ends and is flush with.
Large Trim is largely for exception purposes given it's (1 1/8 in. x 1 1/8 in.) fairly large size. Used almost exclusively for outside edges where a panel ends even with a wall surface or two panels meet at an "outside" corner edge.
J-Trim is probably the easiest to work with given the backside area is larger, providing more area for the panel to "hold" it. (1 3/4 in x 3/4 in.)
Division Trim is very specific for use to cover the seams where two panels come together.
Our advice has typically been to not stress on trying to get the Trim count just right pre-panel installation unless you have drawn it out and are very certain on your installation plan. You'll find lots of uses for remaining scrap and Edge Trim can typically be added at any time.

J Trim works with storeWALL Heavy Duty and Standard Duty panels. Recommended use is for trimming Left/Right edges or framing the entire installation, much like a picture frame. Easiest trim style to work with.

Divisional Trim works with storeWALL Heavy Duty and Standard Duty panels. Recommended use is for trimming where two panels come together.



